Solids Dortmund is part of the Solids European Series, which are the largest professional trade shows exclusively focussing on the powder and bulk industry.
The fair will take place in October 9th - 10th 2024 in Dortmund.
Venue
Messe Dortmund
Rheinlanddamm 200
D-44139 Dortmund
Date & opening times
October 09th - 10th 2023
09 AM - 05 PM
Visit the website of the trade fair.
To register free of charge, please click here.
We are looking forward to your visit at our stand K40 - 5!
The microwave-indicator DYNAguard M is used for monitoring the mass flow in open and closed transport processes also with big distances between sensor and conveyed material.
Independent of particles moving direction solid materials with velocity of at least 0.1 m/s will be detected by passing the microwave field.
Conveying or feeding problems of powders, pellets or granules are detected early and thus should be avoided. This helps to prevent plant failures like clogging, material loss, idle or other serious difficulties.
DYNAguard M has to be installed with an angle of 45° up to 90° of flow direction. Moving mechanical parts e.g. rotary valves, propellers or similar should not be in the detection field, because this might be detected as flow of material. If these 'disturbance source' can not be displaced, they have to be shielded or a DYNAguard of electrostatic type as DYNAguard P should be used.
| Material | Housing | Stainl. steel 1.4305 (ASIS 303) |
|---|---|---|
| Window (standard) | PTFE | |
| Sealing (standard) | NBR | |
| Ambient cond. | Temperature | -20 °C ... +70 °C (-4 °F ... +158 °F) |
| Degree of protection | IP 65 (EN 60529) | |
| EMC | Nach EN 61326-1 | |
| Process cond. | Temperature | -20 ... +90 °C (-4 °F ... +194 °F) |
| Pressure | Max. 2 bar (29 lbs) | |
| Relay | Switching voltage | Max. 110 VDC / 125 VAC |
| Min. 10 mVDC | ||
| Switching current | Max. 1 A, 30 VDC / 0,5 A, 125 VAC | |
| Min. 10 μA | ||
| Switching power | 30 W / 62,5 VA | |
| Microwave | Transmitting power | 5 mW bei +25 °C |
| Frequency | 24 GH | |
| Supply | Voltage | 18 - 36 VDC, 16 - 28 VAC |
| Current consumpting | Approx. 80 mA bei 24 VDC | |
| Adjustment | Sensitivity | Wide range |
| Damping | 0 - 22 s | |
| Relay hysteresis | 0 - 30 % |
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg
Phone +49 40 790 185 0
Fax +49 40 790185 18
info@dynainstruments.com
INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY
FOR MORE THEN 20 YEARS
Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM
PRIVACY STATEMENT
