SOLIDS Logo 2020 Dortmund pos e1584027311459

Solids Dortmund is part of the Solids European Series, which are the largest professional trade shows exclusively focussing on the powder and bulk industry.

The fair will take place in October 9th - 10th 2024 in Dortmund.

 

Venue

Messe Dortmund
Rheinlanddamm 200
D-44139 Dortmund

 
Date & opening times

October 09th - 10th 2023
09 AM - 05 PM

Visit the website of the trade fair.

To register free of charge, please click here.

 

We are looking forward to your visit at our stand K40 - 5!

  • Description
  • Technical Data
  • Downloads

The indicator DYNAguard P is used for monitoring the mass flow in solid material handling applications such as pneumatic transport lines, free fall pipes, chutes or hopper in a wide range of mass flow from g/h to t/h.

The meter detects moving electrical charges that are produced, for example, through friction with other objects such as the pipe wall and then naturally adhere to the solids surface solids, solid lining will not be detected.

The detection area goes some centimeters around the sensor plate so that nearby located moving components as e.g. flaps do not have any influence.

Due to the measuring principle also moving massive compact solids as plates or rods can be monitored.

The device is not applicable for solids which build up an electrical conducting layer on the sensor surface through friction or deposition.

 

Material Housing Stainl. steel1.4305 (ASIS 303)
  Sensor plate (standard) Stainl. steel1.4571 (AISI 316 Ti)
  Isolation (standard) Polyamid (PA)
  Sealing (standard) NBR
Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
  Degree of protection IP 67 (EN 60529)
  EMC According to EN 61326-1
Process cond. Temperature Max. +90 °C (+194 °F)
  Pressure Max. 6 bar (84 lbs)
Output DYNAguard P01 Relais: max. 48 V AC/DC, 1A
    High/low switchable
  DYNAguard P02 Transistor: galvanically isolated
    Max. 31 V DC, 15 mA
    High/low switchable
  DYNAguard P20 4 - 20 mA, galvanically isolated
    Load < 500 Ω
Supply voltage DYNAguard P01/02 17 - 31 V DC, max. 60 mA
  DYNAguard P20 17 - 31 V DC, max. 90 mA
Adjustment Sensitivity 1 - 180.000
  Damping 0 - 10 s (P01/02), 0 - 180 s (P20)
  Switchpoint 1 - 10 (DYNAguard P01/02)
  Zero set 4 mA (DYNAguard P20)

 
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg 

Phone +49 40 790 185 0 
Fax +49 40 790185 18 
info@dynainstruments.com

DYNALogoKlein

INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY

FOR MORE THEN 20 YEARS

EX logo gross        IECEx logo gross

  

Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM 
PRIVACY STATEMENT

kisspng bureau veritas iso 14000 iso 14001 iso 9000 iso 90 5b12dd245d88f1.2194740915279629163831       

DYNAInstruments as Text