Solids Dortmund is part of the Solids European Series, which are the largest professional trade shows exclusively focussing on the powder and bulk industry.
The fair will take place in October 9th - 10th 2024 in Dortmund.
Venue
Messe Dortmund
Rheinlanddamm 200
D-44139 Dortmund
Date & opening times
October 09th - 10th 2023
09 AM - 05 PM
Visit the website of the trade fair.
To register free of charge, please click here.
We are looking forward to your visit at our stand K40 - 5!
The sensor electronics units of DYNAguard V connected with process couplings of ESR series helps to monitor the mass flow in solid material handling applications such as pneumatic transport lines, feeders or gravity chutes in a wide range of mass flow from g/h to t/h.
Conveying or feeding problems of powders, pellets or granules are detected early and thus should be avoided. This helps to prevent plant failures like clogging, material loss, idle or other serious difficulties.
The meter detects moving electrical charges that are produced, for example, through friction with other objects such as the pipe wall and then naturally adhere to the solids surface, solid lining will not be detected.
A multitude of sensor mechanics units makes process coupling very easy and allows cost effective solutions for almost any monitoring application - also in existing conveying systems. The advantage of this modular concept also appears in case of refit or exchange.
The device is not applicable for solids which build up an electrical conducting layer on the sensor through friction or deposition.
 |
ESR_BR "Flanged Pipe" |
 |
ESR_CL "Clamp Connection" |
 |
ESR_F "DIN-/ANSI Flange" |
 |
ESR_ZF "Wafer" |
 |
ESR_SV "Plastic Pipe" |
 |
ESR_RS "Pipe Connection" |
 |
ESR_RE "Rectangle" |
 |
ESR_TR "Funnel" |
| Material | Housing | Stainl. steel 1.4305 (ASIS 303) |
|---|---|---|
| Screw-link | Stainl. steel 1.4301 (AISI 316 Ti) | |
| Sealing | NBR | |
| Ambient cond. | Temperature | -20 °C ... +70 °C (-4 °F ... +158 °F) |
| Degree of protection | IP 67 (EN 60529) | |
| EMC | According to EN 61326-1 | |
| Output | DYNAguard V01 | Relay: max. 48 V AC/DC, 1A |
| High/low switchable | ||
| DYNAguard V02 | Transistor: galvanically isolated | |
| Max. 31 V DC, 15 mA | ||
| High/low switchable | ||
| DYNAguard V20 | 4 - 20 mA, galvanically isolated | |
| Load < 500 Ω | ||
| Supply voltage | DYNAguard V01/V02 | 17 - 31 V DC, max. 60 mA |
| DYNAguard V20 | 17 - 31 V DC, max. 90 mA | |
| Adjustment | Sensitivity | 1 - 180.000 |
| Damping | 0 - 10 s (K01/02), 0 - 180 s (V20) | |
| Switchpoint | 1 - 10 (DYNAguard V01/02) | |
| Zero set | 4 mA (DYNAguard V20) |
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg
Phone +49 40 790 185 0
Fax +49 40 790185 18
info@dynainstruments.com
INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY
FOR MORE THEN 20 YEARS
Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM
PRIVACY STATEMENT
