DYNA M-flow

Flow Measurement of bulk solids with microwave-technology
  • For pneumatic conveying and freefall processes

  • Easy installation and start up

  • Contact-less and integral measuring

  • Adjustable sensitivity

  • Long-term stable, reliable, robust

  • Sensor supply for connections up to 1200 m

  • Galvanically separated RS485-Interface for PLC-Connection

  • Analogue output, pulse output, RS232, RS485 and threshold alarm relay

  • Description
  • Technical Data
  • Download

Using state-of-the-art microwave technology the flowmeter DYNA M-flow is designed for flow measurement in metallic pipelines from a few kg/h to many t/h. The system is suitable for on-line measurement of powders, dust, pellets, and granulates.

The measurement principle of the DYNA M-flow is based on the physical Doppler-Effect, whereas the sensor generates a uniform field in the microwave frequency range inside the pipeline. These microwaves are being reflected by particles passing through the pipe. Calculation of frequency and amplitude changes allows an accurate determination of the solid's mass flow rate. Nonmoving particles like dust accumulation are excluded from calculations.

 

Design

 

 

The DYNA M-flow consists of a probe, a DIN-rail transmitter, a welding branch and the PC-software DYNAvisual.

The process interface occurs by a welding branch, through which the sensor is screwed flush with the inside of the pipe. With this a flanging at perpendicular and horizontal pipes for free fall and pneumatic conveying occurs.

The probe is connected by a four core cable to a DIN-rail mounted transmitter with 4...20 mA, pulse output, error relay, RS232 and RS485 output.

For commissioning and calibration a notebook with our DYNAvisual software is needed. Calibration can be performed with either one or more reference points.

The measurement value is output either analogue or as digital signal. A serial COM interface is available at the front of the transmitter to connect a notebook computer and a RS485 interface for connection to a PLC system.

 

 

 


Technical Data Sensor

Material Antenna Stainl. steel 1.4571 (AISI 316 Ti)
  Isolation Polyamide (PA 6.6)
  Process coupling Welding branch, stainl. steel1.4571 (AISI 316Ti)
Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
  Degree of protection IP 65 (EN 60529)
  EMC According to EN 61326-1

 

Technical Data Ecaluationg Unit

  Design DIN-rail, 22,5 mm
  Supply voltage 18 ... 31 V DC, 3 W
Ambient cond. Temperature +10 °C ... +60 °C (+14 °F ... +140 °F)
  Degree of protection IP 30 (EN 60529)
Output Analogue 0,4 ... 20 mA (load < 750 Ω)
    0,2 ... 10 V
  Digital Pulse as Open Collector
    Error relais 30 V AC/DC; 0,5 A
  Interfaces RS 232 und RS 485

 

Process Data

Process conditions Temperature Max. +90 °C (+194 °F)
  Pressure Max. 40 bar (570 lbs)
  Partical size 0,01 μm ... 20 mm
  Pipe cross section Max. DN 300
  Mas flow rate Min. 1 kg/h

 

 

 
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg 

Phone +49 40 790 185 0 
Fax +49 40 790185 18 
info@dynainstruments.com

DYNALogoKlein

INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY

FOR MORE THEN 20 YEARS

EX logo gross        IECEx logo gross

  

Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM 
PRIVACY STATEMENT

logo bv       iso 9001 2008 blue w200px