The fair will take place from July 17th - 19th 2024 in Shanghai, China.
Visit the website of the trade fair.
Our distributor Beijing Shihao is looking forward to your visit at his stand!
The fair will take place from July 17th - 19th 2024 in Shanghai, China.
Visit the website of the trade fair.
Our distributor Beijing Shihao is looking forward to your visit at his stand!
Using state-of-the-art microwave technology the flowmeter DYNA M-flow is designed for flow measurement in metallic pipelines from a few kg/h to many t/h. The system is suitable for on-line measurement of powders, dust, pellets, and granulates.
The DYNA M-flow consists of a probe, a DIN-rail transmitter, a welding branch and the PC-software DYNAvisual.
The process interface occurs by a welding branch, through which the sensor is screwed flush with the inside of the pipe. With this a flanging at perpendicular and horizontal pipes for free fall and pneumatic conveying occurs.
The probe is connected by a four core cable to a DIN-rail mounted transmitter with 4...20 mA, pulse output, error relay, RS232 and RS485 output.
For commissioning and calibration a notebook with our DYNAvisual software is needed. Calibration can be performed with either one or more reference points.
The measurement value is output either analogue or as digital signal. A serial COM interface is available at the front of the transmitter to connect a notebook computer and a RS485 interface for connection to a PLC system.
Material | Antenna | Stainl. steel 1.4571 (AISI 316 Ti) |
---|---|---|
Isolation | Polyamide (PA 6.6) | |
Process coupling | Welding branch, stainl. steel1.4571 (AISI 316Ti) | |
Ambient cond. | Temperature | -20 °C ... +70 °C (-4 °F ... +158 °F) |
Degree of protection | IP 65 (EN 60529) | |
EMC | According to EN 61326-1 |
Design | DIN-rail, 22,5 mm | |
Supply voltage | 18 ... 31 V DC, 3 W | |
Ambient cond. | Temperature | +10 °C ... +60 °C (+14 °F ... +140 °F) |
Degree of protection | IP 30 (EN 60529) | |
Output | Analogue | 0,4 ... 20 mA (load < 750 Ω) |
0,2 ... 10 V | ||
Digital | Pulse as Open Collector | |
Error relais 30 V AC/DC; 0,5 A | ||
Interfaces | RS 232 und RS 485 |
Process conditions | Temperature | Max. +90 °C (+194 °F) |
---|---|---|
Pressure | Max. 40 bar (570 lbs) | |
Partical size | 0,01 μm ... 20 mm | |
Pipe cross section | Max. DN 300 | |
Mas flow rate | Min. 1 kg/h |
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg
Phone +49 40 790 185 0
Fax +49 40 790185 18
info@dynainstruments.com
INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY
FOR MORE THEN 20 YEARS
Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM
PRIVACY STATEMENT