Largest industrial automation event in Brazil.
The fair will take place from October 09th - 10th 2024 in Belo Horizonte, Brasil.
Visit the website of the trade fair.
Our distributor VikaControls is looking forward to your visit at his stand!
Largest industrial automation event in Brazil.
The fair will take place from October 09th - 10th 2024 in Belo Horizonte, Brasil.
Visit the website of the trade fair.
Our distributor VikaControls is looking forward to your visit at his stand!
The microwave-indicator DYNAguard M is used for monitoring the mass flow in open and closed transport processes also with big distances between sensor and conveyed material.
Independent of particles moving direction solid materials with velocity of at least 0.1 m/s will be detected by passing the microwave field.
Conveying or feeding problems of powders, pellets or granules are detected early and thus should be avoided. This helps to prevent plant failures like clogging, material loss, idle or other serious difficulties.
DYNAguard M has to be installed with an angle of 45° up to 90° of flow direction. Moving mechanical parts e.g. rotary valves, propellers or similar should not be in the detection field, because this might be detected as flow of material. If these 'disturbance source' can not be displaced, they have to be shielded or a DYNAguard of electrostatic type as DYNAguard P should be used.
Material | Housing | Stainl. steel 1.4305 (ASIS 303) |
---|---|---|
Window (standard) | PTFE | |
Sealing (standard) | NBR | |
Ambient cond. | Temperature | -20 °C ... +70 °C (-4 °F ... +158 °F) |
Degree of protection | IP 65 (EN 60529) | |
EMC | Nach EN 61326-1 | |
Process cond. | Temperature | -20 ... +90 °C (-4 °F ... +194 °F) |
Pressure | Max. 2 bar (29 lbs) | |
Relay | Switching voltage | Max. 110 VDC / 125 VAC |
Min. 10 mVDC | ||
Switching current | Max. 1 A, 30 VDC / 0,5 A, 125 VAC | |
Min. 10 μA | ||
Switching power | 30 W / 62,5 VA | |
Microwave | Transmitting power | 5 mW bei +25 °C |
Frequency | 24 GH | |
Supply | Voltage | 18 - 36 VDC, 16 - 28 VAC |
Current consumpting | Approx. 80 mA bei 24 VDC | |
Adjustment | Sensitivity | Wide range |
Damping | 0 - 22 s | |
Relay hysteresis | 0 - 30 % |
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg
Phone +49 40 790 185 0
Fax +49 40 790185 18
info@dynainstruments.com
INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY
FOR MORE THEN 20 YEARS
Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM
PRIVACY STATEMENT