SOLIDS Parma 2026

We call back
Phone +49 40 790 185 0
info@dynainstruments.com

SOLIDS PARMA

The international bulk goods industry meets in Italy at SOLIDS Parma: well-known manufacturers from all over Europe bring practical solutions for the handling, processing, storage, analysis and transport of fine to coarse-grained materials to the center of the process and agricultural industry Italy: to Parma - in the center of Emilia Romagna.

The fair will take place from February 11th to 12th, 2026 in Fiere di Parma.

Venue

Fiere di Parma
Viale Delle Esposizioni 393a
43126 Parma PR
Italia

Date

February 11th to 12th 2026

Our Distributor Ital Control Meters is looking forward to your visit at his stand!

Description
Downloads
Technical data

Application Area

The DYNAairguard is a measuring device for monitoring the dust concentration in the ambient air.
The device is used, for example, in industrial production halls and detects when leaks occur in plants, machines or pneumatic conveying pipelines and dust escapes.
The use of the DYNAairguard effectively protects the health of employees.
In the case of explosive dusts, the danger of dust explosions is detected in time and intervention is possible.

Continuous Dust Measurement for

Workplaces in production halls
Machines and plants
Pneumatic conveyor lines
Big bag filling stations
Silo enclosures

When delivered, the sensor is already preset and can usually be used immediately.

DYNAairguard Produktseite 2

The DYNAairguard – a big gain in safety for very little effort. Give us a call. Or request a ring-back. We can provide valuable advice on dust measurement.

How it works

The DYNAairguard technology is based on the proven electrostatic measuring principle (further development of the triboelectric principle), whereby particles are detected that collide with or fly past the sensor rod.
Deposits on the sensor rod do not influence the measurement. Only moving particles generate a signal that is proportional to the dust content of the ambient air and is evaluated by the electronics.
To measure the dust concentration of the ambient air, an air flow is continuously drawn through the device by a quiet and at the same time robust fan. The air passes the sensor rod inside the rectangular duct and exits on the fan side.
Two electronic versions are available
• with analogue output (4 ... 20 mA)
• with relay output

Dimension in mm

Brochure DYNAguard GB

DYNAairguard Product Information

Versorgung (Versionen mit Schaltausgang)	24 VDC
Versorgung (Versionen mit Analogausgang)	24 VDC
Ausgang (Versionen mit Relais-Schaltausgang)	Max. 48 VAC/DC, 1A
	NC (Öffner) NO (Schließer) umschaltbar
Ausgang (Versionen mit Analogausgang)	4 .. 20 mA (aktiv), galvanisch getrennt, Bürde < 500 Ω
Empfindlichkeit	ab 0,1 mg/m³
Dämpfung	0 .. 10 s
Schaltpunkt (Versionen mit Schaltausgang)	1 .. 10 einstellbar
Abgleich (Versionen mit Analogausgang)	4 mA Nullpegel
Umgebungstemperatur	-20 °C .. +50 °C (-4 °F .. 122 °F)
Volumenstrom	ca. 100m³/h
Geräuschentwicklung	29 dB(A)
Material Strümungskanal	Stahl, lackiert
Material Elektronik-Gehäuse	Edelstahl 1.4301
Material Sensorstab	Edelstahl 1.4571
Sensorstab-Isolierung	PEEK
Material Dichtung	FPM
Schutzart	IP20 (EN 60529)
Störfestigkeit	gemäß EN 61326-1
Gewicht	6 kg