The DYNAguard D Eco monitors the dust concentration behind a bag or cartridge filter. It is installed on the clean air side of the filter. It identifies if a filter is damaged, e.g. by cracks, fractures or assembly errors. This allows to replace a damaged or broken filter in time, without losing production time and without polluting the shopfloor or environment. Dust monitors are especially important in case of heavily contaminated air, recirculation into the factory, strict external emission limits or dust reusage.
Technical data
| Housing Material | Aluminium |
| Sesor rod | Stainless Steel (1.4571) |
| Rod lenght | 250 mm, 500 mm or costomized |
| Mech. connection | NPT 0,5" |
| Ambient temperature |
-20°C to+50°C -10°C to +70°C (ATEX Vers.) |
| Process temperature |
-20°C to +150°C -10°C to +180°C (ATEX Vers.) |
| Process pressure |
0 - 2 bar 0,8 - 1,1 bar (ATEX Vers.) |
| Protection class | IP65 |
| EX protection / ATEX | Optional up to Zone 20/21 |
| Power Supply | 24 VDC |
| Current consumption | Max. 50 mA, <2W |
| Output (switching) | 2x Relay contacts |
| Switching voltage | 60 VAC or 60 VDC |
| Switching current | Max. 100 mA |
| Switching power | 6 W |
| Adjustable parameter | Sensitivity |
| Calibration | Automatically over 10 min |
| Indicators |
Multi color LED for the dust level (Non-ATEX Vers. only) |
DYNA Instruments - a MÜTEC brand
Bei den Kämpen 26
D-21220 Seevetal
Phone +49 40 790 185 0
Fax +49 40 790185 18
info@dynainstruments.com
INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY
FOR MORE THEN 30 YEARS
Copyright © 2016 DYNA Instruments - a MÜTEC brand
IMPRESSUM
PRIVACY STATEMENT
