SOL REC Kombilogo

Solids Dortmund is part of the Solids European Series, which are the largest professional trade shows exclusively focussing on the powder and bulk industry.

The fair will take place in March 18th - 19th 2026 in Dortmund.

 

Venue

Messe Dortmund
Rheinlanddamm 200
D-44139 Dortmund

 
Date & opening times

March 18th - 19th 2026
09 AM - 05 PM

 

We are looking forward to your visit at our stand C22- 4!

  • Description
  • Technical Data
  • Downloads

DYNArad combines the measurement values of density and velocity (DYNAvel) to determine teh mass flow rate at pneumatic conveying processes and free fall applications.

In particular for the flue ash humidification control at power plants (up to 450 t/h) DYNAvel has proved its worth worldwide.

Thanks to the non-contact measurement no maintenance costs arise.

Mode of operation

The radiometric measurement of density is based on the Gamma transmission principle. The radiation, emitted from a shielded source is directed through the pipeline towards a scintillation detector at the opposite side. When irradiating the pipeline, the radiation is attenuated. The extent to which it is attenuated is directly proportional to the density of the measured material, since type of radiation and measuring geometry are constant. 
Moreover the measurement performance is not affected by temperature, pressure, viscosity, color or chemical properties of the measured material.

  • Non-contacting and non-intrusive
  • No wear and tear
  • Maintenance-free operation
  • Highly accurate and repeatable
  • Unaffected by temperature, pressure, dust, colour, conductivity or chemical properties of the medium
  • Reliable measurement even under extreme measurement conditions

For details of the velocity measurement please refer to DYNAvel.

The mass flow rate is resulting from density, speed and cross section of the pipe.

 

In cooperation with BERTHOLD TECHNOLOGIES GmbH & Co. KG Germany.

 

Measurement methods

Velocity measurement:
non-contact electrostatic / capacitive
Concentration measurement:
non-contact radiometric

Size

DN 100...DN 400
DIN flange, ANSI flange...

Measuring range

Velocity: 2...30 m/s
Concentration: 50...1000 kg/m3
Flow rate: bis 500 t/h

Accuracy typically 1% of the end value
Measuring material Bulk materials of any kind
Type of conveying Pneumatic conveying, free-fall
 Installation position  Any
Materials

Housing: Steel, galvanized, coated or stainless
steel Sensor pipe velocity measurement: glass
fibre reinforced epoxy (standard)

   
 Pressure up to 64 bar
 Protection class IP 67

 

 

 
DYNA Instruments - a MÜTEC brand
Tempowerkring 7
D-21079 Hamburg 

Phone +49 40 790 185 0 
Fax +49 40 790185 18 
info@dynainstruments.com

DYNA Logo 2025 klein

INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY

FOR MORE THEN 30 YEARS

EX logo gross        IECEx logo gross

  

Copyright © 2016 DYNA Instruments - a MÜTEC brand
IMPRESSUM 
PRIVACY STATEMENT

kisspng bureau veritas iso 14000 iso 14001 iso 9000 iso 90 5b12dd245d88f1.2194740915279629163831       

DYNA Logo 2025